Favorites ()

Recent Searches

loading

Jobs for “Welding”

32 matches

  • Technician

    Broken Arrow, OK Temp To Full-Time 2 Months ago
    This position would be great for someone who has some type of diesel mechanic experience. The company is willing to pay more if the candidate has prior work experience relevant in this field. (The candidates are few and far between.) POSITION SUMMARY: The Valve Technician will perform hands on maintenance, manual machining, welding, troubleshooting / assessment, and repair work on valves based on the associated skill level, traveling to and from customer sites and service center; maintaining quality a...
    Order: 20270
  • Mechanic

    Oklahoma City, OK Temp 2 Months ago
    Summary: • Repair Technicians must understand motor electrical connections and power supply panels with the ability to operate safely to complete motor testing. The ability to use a megger, high potential tester, volt & amp meters. Must be able to read and record critical measurements with micrometers. Skilled in reading dial indicators, checking shaft and rotor runouts. Knowledge dismantling, inspecting, testing, troubleshooting, and assembling a variety of rotating equipment including, AC and DC motors. E...
    Order: 20176
  • Maintenance

    Edmond, OK Temp 4 Months ago
    Maintenance III To be able to perform a variety of specific & general maintenance/preventative task, as well as inspections, servicing, overhaul of equipment and facilities, which will include mechanical, electrical, HVAC, and plumbing systems and functions Essential Duties and Responsibilities include the following (other duties may be assigned): To perform electrical, mechanical, plumbing, pneumatic, and overall general preventative maintenance on all equipment in all areas of the facility. Needs to be...
    Order: 19987
  • Technician

    Yukon, OK Temp 2 Weeks ago
    Summary Description: The Service Technician will report to the Service Manager. This position will service and repair semi-trailers, including box trucks, brakes, lights, seals and general maintenance to meet DOT standards. Additional duties include replacing flooring, rub rails, doors and door trim, repairs to roofs, panels, nose panels and upper rails. Duties and Responsibilities: Diagnose any mechanical, electrical, or other breakdown or failure of a motor vehicle or related equipment. Ability to trou...
    Order: 20406
  • Mechanic

    Yukon, OK Temp 2 Weeks ago
    Will service and repair semi-trailers, including box trucks, brakes, lights, seals, refrigeration units and general maintenance to meet DOT standards. Additional duties include replacing flooring, rub rails, doors and door trim, repairs to roofs, panels, nose panels and upper rails. Duties and Responsibilities: Troubleshoot/perform routine/corrective maintenance for all vehicles including braking systems and hydraulic and air systems for tractors and trailers and for Reefer Techs-refrigeration units. Employ...
    Order: 20408
  • Pipe Welder

    Catoosa, OK Temp To Full-Time 3 Months ago
    Position: Pipe Welder Pay Rate/Range: $28 Description: Prospective candidate must pass a 6G Pipe Test to demonstrate their welding proficiency. The welder will work with a variety of materials, including carbon steel, stainless steel, duplex stainless steel, nickel alloys, and titanium. Ability to do the following process, GNAW, GTAW, FCAW, SAW, and SMAW. Job Requirements: Ability to read a tape measure. Read Blueprints. interpret weld symbols. Steel Toe Boots required. Non-Climate Controlled Environmen...
    Order: 20031
  • Assembly Technician

    Oklahoma City, OK Temp To Full-Time More than a year ago
    Position: Assembly TechnicianPay Rate/Range: $16 to $20 DOE Description: must be able to demonstrate the assembly of different components, parts or sub-assemblies throughout the entire assembly process. Read, and understand manufacturing instructions, blueprints, process documents, and bill of material. An ideal assembly technician would definitely have a good hand and eye coordination with demonstrated excellent manual dexterity. Job Requirements: HSD or GED. Two plus years related experience and/or trai...
    Order: 18058
  • Quality Inspection

    Tulsa, OK Temp To Full-Time More than a year ago
    Privately owned company looking to hire a full-time inspector to evaluate aircraft and non-aircraft precision metal parts. Pay will be BOE, $20-$25/hr. Job Description -Maintain ISO9001:2015 Quality Management System -Maintain and edit Quality Systems Manuals -Inspect incoming material and hardware -Verify dimensions using measuring instruments and inspection equipment -Complete inspection records and reports -Identifying (marking) all items of measuring equipment in calibration system and maintaining a log...
    Order: 17749
  • Painter

    Oklahoma City, OK Temp To Full-Time More than a year ago
    Position: Painter Pay Rate/Range: DOE to 17.20 per hour + 1 shift Differential for 2nd shift Description: An industrial painter is responsible for the application of a wide range of industrial liquid coatings which may include one, three-coat procedures to manufactured products in accordance with the specification of the OEM (Originator Equipment Manufacturer) and Customer. The core tasks, duties, and responsibilities that commonly make up the job description of industrial painters are listed below: Per...
    Order: 7614
  • Industrial Maintenance

    Broken Arrow, OK Temp To Full-Time More than a year ago
    Position: Industrial MaintenancePay Rate/Range: $22-26 HourDescription: Under general direction, performs work of average to considerable difficulty in the journey-level performance of building, grounds, machine and tool maintenance); mechanical equipment installation and repair; hydraulics, and welding machines. Ensure all maintenance activities are conducted in safe manner and all outputs receive required certifications for safety.Job Requirements:High School or GED equivalent preferred. Candidates inter...
    Order: 17847
  • Mig Welder

    Tulsa, OK Temp To Full-Time 2 Weeks ago
    Must be able to pass a 2G Mig Weld Test $20-23/hr DOE
    Order: 20363
  • 1st Shift Assembly

    Collinsville, OK Temp To Full-Time 5 Days ago
    Pay: $18-20/hr The job will require someone with mechanical assembly experience as all the work in stage 4 is performing assembly of the boiler, there will be no welding for this position. The work will consist of Installing valves, insulation, casing, duct work and burners. These are the major items but there is quite a bit of cosmetic detail work that gets done in stage 4 this person would complete.
    Order: 20452
  • Tig Welder

    Tulsa, OK Temp To Full-Time 4 Months ago
    Tig Welders (spools) - must have spool experience $22-$25 Test: 6G Tig test PRINCIPAL DUTIES AND RESPONSIBILITIES: This position includes three distinct Grade Levels. The responsibilities of each grade include, but are not limited to, the following: Set-up/run RT & UT Quality Pipe Welds Set-up/run UT Quality Branch Welds Able to make any UT or RT Weld Repair Clean and stamp all welds Set-up/run all structural and non-code welds Set-up and run all oxy-fuel cutting/burning Ability to perform hydro testing...
    Order: 19957
  • Tig Welder

    Tulsa, OK Temp To Full-Time 4 Months ago
    Tig Welders (spools) - must have spool experience $22-$25 Test: 6G Tig test PRINCIPAL DUTIES AND RESPONSIBILITIES: This position includes three distinct Grade Levels. The responsibilities of each grade include, but are not limited to, the following: Set-up/run RT & UT Quality Pipe Welds Set-up/run UT Quality Branch Welds Able to make any UT or RT Weld Repair Clean and stamp all welds Set-up/run all structural and non-code welds Set-up and run all oxy-fuel cutting/burning Ability to perform hydro testing...
    Order: 19958
  • Enclosure Assembly

    Tulsa, OK Temp To Full-Time More than a year ago
    Position: Enclosure AssemblyPay Rate/Range: 18-19Description: Read and comprehend instructions and follow established procedures. Collect all material and equipment needed. Take precision measurements to ensure perfect fit of components. Select or modify components according to measurements. Check output to ensure highest quality. Maintain equipment in good condition. Report on issues, malfunction, or defective parts.Job Requirements: Proven experience as assembler. Must be able to pass tape measure test. L...
    Order: 7506
  • 6G Pipe Welder

    Broken Arrow, OK Temp To Full-Time More than a year ago
    Position: 6G Pipe WelderPay Rate/Range: $22-$22.75 hour DOEDescription: The welder will work in the fabrication of ASME certified spiral heat exchangers fabricated from carbon steel, stainless steel, duplex, nickel alloys, and titanium. The Welder, using prints and other documents will fabricate weld using GMAW, GTAW, FCAW, SAW and SMAW processes. Must be able to perform x-ray quality welds in carbon steel, stainless steel, and duplex ss. All work is ASME certified and stamped. Must be able to pass AS...
    Order: 7581
  • 2nd Shift Weld Assembly

    Oklahoma City, OK Temp To Full-Time More than a year ago
    Pay 18 per hour Monday through Thursday. 4-10sWelders assist in the fabrication of steel frames and building components. Ability to MIG weld and fit are a plus. Responsibilities May Include, But Not Limited To: • Aid in producing quality welds to complete fabrication process • Layout, fit together, align, and weld structural steel according to specifications • Levels, scrapers, 7” hand grinders, and some gouging for tools used• Able to meet established deadlines • Observes all safety and security procedure...
    Order: 7627
  • Saw Department

    Tulsa, OK Temp To Full-Time 1 Month ago
    Must be able to properly read a tape measure, must be able to operate a small shop bandsaw, must be able to identify different pipe diameters, and well as be familiar with different material grades and thicknesses of pipe. You must be familiar with operating different hand tools such as a Pneumatic Pipe Beveler, Oxy/Acetylene Pipe Beveler, Oxy/Acetylene Torch, Plasma Torch, Die Grinder, 4.5” Angle Grinder, and Drill Press. Most of which are all standard welding shop tools. You must be able to read a Bluep...
    Order: 20310
  • Quality Control Inspector

    Central High, OK Temp To Full-Time 10 Months ago
    Position Overview: Performs inspections, checks, and tests for quality control for the manufacturing of products under general supervision. Must be familiar with ASME Section VIII and IX and willing to learn the code requirements/inspection points. Relies on experience and judgment to plan and accomplish goals. A certain degree of creativity and latitude is required. Performs a variety of tasks. Essential Job Functions: ? Conducts testing on product in accordance with established codes and customer requirem...
    Order: 19112
  • Welder/Fitter

    Marietta, OK Temp To Full-Time More than a year ago
    Position: Welder/FitterPay Rate/Range: $18.00Description: the Wilder/fitter is responsible for fabricating machinery per filtra systems company printsJob Duties:responsible for the integration of core competencies into daily functioningcommitment to integrity, knowledge quality of workWelds components per given welding specificationsbuild quality products using all information supplied by engineering in a timely fashion and satisfactory to quality specificationsfollows all quality control guidelines and her...
    Order: 7483
loading